GoldBurs.com · Industry Guide

Oral & Ambulatory Surgery Centers

Oral surgery runs on a tighter clock than most dental settings. Between extractions, implant placement, and bone grafting, a center's surgical schedule often books patient after patient with only minutes to turn a room, so every instrument on the tray has to perform the same way, case after case, without a slip or a dull edge costing time in the chair.

“

The 24K gold layer protects the shank and diamond bond through repeated autoclave cycles, keeping burs dependable across back-to-back surgical schedules and high-volume ASC workflows.

What We Cover

Procedures We Support

Third molar & wisdom tooth extractions

Dependable carbide burs for sectioning and cutting built for the highest-volume procedure most centers run, case after case.

Dental implant placement & bone grafting

Extended-reach instruments for osteotomy site prep, with precision depth control from site to site.

Alveoloplasty & ridge recontouring

Smoothing and reshaping bone after extraction to prepare the site for healing or restoration.

Full and partial crown or bridge removal

Sectioning and removing failing restorations ahead of extraction or re-treatment.

Biopsies & soft tissue procedures

Precise, controlled instrumentation for diagnostic and minor surgical work.

Sedation-based surgical cases

procedures that depend on fast, predictable room turnover between patients.

Featured Products

Testimonials

I ordered several premium diamond burs from GoldBurs.com for use in my dental practice, and they arrived quickly with excellent packaging.

Dr. Sven Müller

GoldBurs.com provided fantastic service and quality tools for my root canal and operative treatments

Dr. Min‑ji Kim

I purchased a variety of DiaGold burs for research and clinical trials. Quality was as described, and performance exceeded expectations.

Prof. Carlos Estevez

This is Dr. Lynn Thomas I'm here with uh Gold Burrs. I've used them for years. I use both the the diamonds and the uh carbides and they've been really good. They're the best price I can find. And it's a good quality product.

Dr Lenn Thomas

I've been using this bur for several years now. This is the fastest cutting bur I've ever used in my entire career.

Dr. David Fein

Hi, my name's David Firestone. I've been a dentist for a many years. The last 15 years, I've been working with the Goldburs company. I love their service, their burs last forever. Not a thing I would change about it, they're the only bur company that I use. Proud to recommend them.

Dr David Firestone.

Hi, my name is Dr. Amir Nikraz. I've been buying my burs from Dana, from the Gold Burrs. And they're great. Their service is great, the burs are great. Thank you very much.

Dr. Amir Nikeaz

Hi, I've been a customer of Dia Gold for many years and they have great pricing and quality and I'm placing another order at the convention today.

Dr. Christopher Wong

I've been buying uh a burst from Gold uh burst for many years. I'm a repeat customer The product is good, very uh reliable, you can use it several times and sterilize it. Good product. I recommend it to everyone.

Dr. Ron Quib

I bought from Diamond Gold, the Diamond Bur and Carbide Bur. They're excellent, I really love it. I came to to order in the show They're a good product.

Dr. Sima Shoumer.

Hi my name is Dr. Talin I have practice in Asina and I buy my burs from Goldburs and I am vey happy with their customer service their products I am very grateful.

Dr. Talin Golnazarian

Dr Maz in Beverly hills has been using gold burs for years I have tried other brands which are excellent but they don’t last as long you want something that’s going to last you a very long time

Dr. Maziyar Ebrahimi

Hi there I started using goldburs just a few months ago and I really love them I think the quality is great ther are lasting me a really long time and they are decently prices

Bran,D Hutalla DDS

Hi I have been buying burs from gold burs for over 30 years these are the best burs in the industry and I recommend every dentist to buy those burs they last long and they are real gold

Greg Rubin DDS

We've been using GoldBurs for many years, my practice. All my associates, they love it, they enjoy it. It's great quality and great, great, great value. I've told it to all my friends and uh, it's just a great product.

Igal Elyassi DDS

I buy all my burs from Gold Burs This is a zirconia cutter. It's cheap It's fast. And uh, honestly, I don't find any other company better than them. Thank you.

Dentist Alan Zaboliam

Hi. I'm Dr. Roseman from California, Sherman Oaks. I'm using this burs in my three offices for the last 25 years with a great success. These burs are multi multi-used. They are not for one time use and exceptional price and service.

Dentist Dan Rosen

Been ordering your burs for the last 20 years. The best value, best burs in town. Thank you.

Dentist Danny Shiri

My name is Dr. Maxut and I like the quality of the diamonds and the price is right and I'm really happy with it

Dentist in Burbank CA

The Requirements

What an Oral Surgery Center / ASC Needs From a Bur Supplier

Instruments built for bone and hard tissue a surgical case demands more from a bur than a routine restorative prep, and a dull or slipping instrument mid-procedure costs the whole schedule.

Reliable performance through aggressive sterilization ASC turnover means autoclave cycles run constantly between cases, and instruments need to hold up to that pace.

Specialized surgical shapes on hand extended-reach and depth-marked instruments for implant site work, not just standard restorative shapes.

Fast turnover between rooms stock that keeps a back-to-back schedule moving, since a center can't push a booked patient because a shape is out.

Bulk pricing that matches surgical case volume centers running a full daily schedule need pricing structured for that pace, not single-tray ordering.

Our 24K gold plated diamond and carbide burs, kits, and Pac-Dent cosmetic line are built around exactly these five requirements.

The Bur Tray

Top Products for Oral Surgery Centers & ASCs

DiaGold Diamond Burs — Chairside Standards for Surgical Prep

Our DiaGold Diamond Burs collection covers the core shapes a surgical schedule reaches for during routine chairside and pre-surgical work:

• Round End Taper & Flat End Taper for margin and contour work ahead of extraction or implant placement.

• Round (Ball) for access and initial site opening.

• Flat End Cylinder for flat-surface reduction on bone and adjacent structures.

• Football / Egg for contouring and smoothing after reduction.

Every shape ships in coarse, medium, fine, and extra-fine grit, so a surgical schedule can move from bulk reduction to fine detail without swapping suppliers between rooms.

Carbide Burs — Cutting & Sectioning Technique

Our Carbide Burs line, including the Operative & Surgical Carbide collection, covers the sectioning and cutting work diamond burs aren't built for:

• Round & Pear Shaped carbides for tooth sectioning during surgical extractions.

• T&F Round & Flame for smoothing bone edges and adjacent tissue after reduction.

Diamond burs cut through enamel and bone contour work; carbide burs section teeth and trim adjacent structure. Keeping both lines stocked means the surgical team never has to improvise mid-case.

Surgical-Length & Depth-Control Diamonds

For work that goes beyond routine chairside prep, our Pin Guide, Depth Marker & Surgical Diamond Burs collection is built specifically for implant and osseous surgery:

• Extended-reach surgical-length diamonds for implant osteotomy and deeper site access.

• Precision depth markers that help a surgeon maintain a consistent, controlled preparation depth site to site.

• Our Extra Large Heads collection for full-arch and larger-scale bone recontouring where a head size isn't enough.

• A dedicated Right Angle Diamonds line for low-speed contra-angle use in posterior sites with restricted access.

These are the shapes that separate a general restorative formulary from one built for surgical work, and most oral surgery centers keep them alongside standard diamonds specifically for implant and bone procedures.

X-REX & T-REX Metal-Cutting Carbides

Extractions and re-treatment often mean cutting through an existing restoration first. Our X-REX metal-cutting carbide line is engineered with enhanced tungsten carbide hardness specifically for that job:

• Fast, clean sectioning of metal alloys, metal-ceramic crowns, and cast restorations ahead of extraction.

• A shape range built to cut through failing restorations without excessive wear or breakage mid-procedure.

• A gold-plated finish that resists corrosion through the repeated sterilization cycles a metal-cutting bur goes through between surgical cases.

Keeping a dedicated metal-cutting carbide on the tray, rather than pushing a standard bur past its limit, is what keeps a crown or bridge removal from adding unplanned minutes to a surgical case.

The Difference

Why Oral Surgery Centers Choose GoldBurs

Corrosion resistance through constant sterilization

The 24K gold layer protects the shank and diamond bond through the repeated autoclave cycles an ASC runs between back-to-back cases.

Smoother, more controlled cutting

Reduced vibration and chatter matter as much in bone and osseous work as they do on a tooth, especially during implant site preparation.

Stronger diamond adherence

The gold bond holds diamond grit to the shank more securely than standard nickel or chrome plating, extending instrument life across a full surgical schedule.

Easier visual inspection

The gold surface makes it simple for surgical staff to confirm an instrument is clean and intact between patients, supporting the infection-control standards an ASC operates under.

Bulk pricing built for surgical volume

Pricing structured for a full daily case schedule, with fast processing so a booked patient is never delayed by a backordered shape.

One supplier for the whole tray

Diamond burs, carbide burs, surgical-length diamonds, and metal-cutting carbides, all on a single account your center manages centrally.

Ordering for Your Center

Whether you're running a single oral surgery suite or a multi-room ASC, ordering works the same way: standardize your tray around a core set of diamond and carbide shapes, add the surgical-length and metal-cutting instruments your case mix requires, and reorder on your center's schedule. Our DiaGold Full Catalogue covers the full range for teams building a standard order guide, and we support centers in California and Texas as well. As your case volume grows, our bulk pricing and inventory scale with you. Centers pairing oral surgery with a broader group practice model can reference our Dental Support Organizations (DSOs) page for network-wide standardization.

Everything you need to know

Frequently Asked Questions

Do you carry instruments specifically built for implant and bone surgery?

Yes. Our Pin Guide, Depth Marker & Surgical Diamond Burs collection includes extended-reach and depth-marked instruments engineered for implant osteotomy and osseous recontouring work.

Can GoldBurs supply burs for cutting through metal crowns during extraction?

Yes. Our X-REX and T-REX metal-cutting carbide burs are engineered with enhanced tungsten carbide hardness specifically for sectioning metal alloys, metal-ceramic crowns, and cast restorations.

Do your instruments hold up to the sterilization pace of a surgical schedule?

Yes. The 24K gold layer on our diamond burs protects the shank and diamond bond through repeated autoclave cycles, which matters for centers running constant turnover between surgical cases.

Do you offer bulk pricing for oral surgery centers and ASCs?

Yes. We offer bulk pack pricing structured for daily surgical case volume. Contact us for a custom quote based on your center's schedule.

How fast can GoldBurs supply a busy surgical schedule?

We process orders quickly and maintain reliable inventory on our surgical-length diamonds, metal-cutting carbides, and standard shapes, so a booked schedule is never held up waiting on a backordered instrument.

Enroll in the

GET A $400 GIFT CARD